本機特點 1、采用皮帶（滾筒、履帶）帶動工件輸送通過并進行噴砂的方式，可實現不間斷噴砂作業。 1、 The belt (roller, crawler) is used to drive the workpiece to pass through and sandblasting can be carried out continuously. 2、 槍架采用擺動式噴砂，可使工件噴砂更均勻，槍架速度可依據實際要求調整。 2、The gun rack adopts swing sandblasting, which can make the workpiece sandblasting more uniform. The speed of the gun rack can be adjusted according to the actual requirements. 3、 采用先進的沙塵分離器，粉塵分離效果好，噴砂效率高 3、Advanced sand dust separator is adopted, with good dust separation effect and high sand blasting efficiency 4、 皮帶（滾筒、履帶）運行速度變頻器可調，正反方向可調換，0.5-3M/min。 4、The frequency converter of belt (roller and track) running speed can be adjusted, and the positive and negative directions can be changed, 0.5-3M/min. 5、 采用PLC智能控制，除啟動和急停外其他功能全部在觸摸屏主頁控制，控制界面為單一界面，工人能直觀的進行操作，降低了本機對操作工人的使用要求。 6、 PLC intelligent control is adopted, and all other functions except startup and emergency stop are controlled on the touch screen home page. The control interface is a single interface, so that workers can operate intuitively, reducing the use requirements of the machine for operators. 適用范圍： 適用于平板類，型材類工件的外表面噴砂處理，如：平面不銹鋼板材，玻璃，石材，烤盤，電燙斗底板，裝飾件，標牌徽章，鋁型板材及其他平面工件等。 Scope of application: It is suitable for sandblasting the outer surface of flat and profile workpieces, such as: flat stainless steel plate, glass, stone, baking tray, iron base plate, decorative parts, signs and badges, aluminum plate and other flat workpieces. 主要參數 型號 BH-PS3060-8A BH-PS3810-12A BH-PS3812-12A 主機外形尺寸 3201*1140*3128 4035*1440*3124 4000*3740*3442 除塵箱尺寸 1450*950*2200 1450*950*2200 1450*1050*2200 噴槍數量 8(支） 12（支） 12（支） 電源要求 380V/50hz三相五線制 380V/50hz三相五線制 380V/50hz三相五線制 除塵箱電機 5.5kw 7.5kw 7.5kw 工件尺寸 W600mm*h80mm W1000mm*h120mm W1200mm*h120mm 總功率 約8.65kw 約11.6kw 約11.6kw