“M995A”中性結構膠是一種性能優(yōu)良的結構硅酮密封膠: 1)單組分，室溫型，使用方便： 2)中性固化，不腐蝕大多數基材; 3)粘結性強，強度高，合理的柔韌性和伸長量； 4)具有耐臭氧、耐紫外線等抗老化性能; 5)耐高低溫性能卓越，在-40℃~150℃的范圍內保持彈性; 6）適合于玻璃,金屬建材,石材,混凝土,磚瓦,陶瓷,塑料間的結構性粘結密封. 使用: 1)施工溫度在5℃~40℃之間; 2)用兩塊布法清潔基材; 3)將膠嘴按需要的大小做45°切斷; 4)將膠打滿接縫處； 5)約30分鐘結皮，應在此前進行修整. 重要: 1)使用前請做材料相容性測試; 2)不用于表面溫度(45°C)以上的材料; 3)不用于有滲出物的材料； 4)不用于長期潮濕或完全的密閉環(huán)境. 注意: 遠離兒童! 避免接觸眼睛和皮膚! 如有接觸,請用水沖洗;仍然不適的請就醫(yī)檢查. 執(zhí)行標準:GB/T 16776-2005 保質期:9個月(<24℃)   “MEISHI 995A”is a high performance structural silicone sealant: 1)one-component，room temperature，easy to use； 2)neutral curing,no corrosion to the materials; 3)excellent adhesion,high strength,appropriate of flexibility and elongation； 4)Is the excellent performance of heat and cold, Keep elastic between in low(-45℃) and high(+150℃) temperatures; 5)Suitable for among glass,aluminum material,stone,concrete,brick,ceramic,plastic,structural adhesive and sealing. DIRECTIONS: 1)Use of temperature between 5℃~40℃; 2)Substrates should be solvent cleaned using two clothes method; 3)Cut the nozzle to desired opening at 45°angle ; 4)Fill the joint completely; 5)Formation of skin in 30minutes,carried out dressing before use. IMPORTANT: 1)Be material compatibility testing before use; 2)Do not use in structural applications or where surface temperatures exceed 45℃ ; 3)Should not be used for all Exudation of liquid materials; 4)Should not be use in wet or unventilated and close places. PRECAUTIONS: Keep out of the reach of children! Avoid contact with eyes and skin! In case of contact,flush with lot water;If still indisposed,consult a doctor. STANDARDS: GB/T 16776-2005. DURABILITY: 9 Months(<24℃).